Inner page banner



Series F/M/HP
Single, Dual and High Voltage

Mechanical Configurations

 

 

NOTE: The torque for mounting screws must be 6 to 9 In-Lbs.

SERIES F/M/HP SINGLE
Pin No.
SINGLE
1
+INPUT
2
TRIM DOWN
3
TRIM
4
TRIM UP
5
SHUT DOWN
6
-INPUT
7
-OUTPUT
8
+ OUTPUT
Typcial Weight: 210 Grams

* 1.00" for any special single output unit of 100 volts or above.

NOTE: The torque for mounting screws must be 6 to 9 In-Lbs.

SERIES F/M/HP DUAL
Pin No.
DUAL
1
+INPUT
2
TRIM DOWN
3
TRIM
4
TRIM UP
5
SHUT DOWN
6
-INPUT
7
-OUTPUT (1)
8
+ OUTPUT (1)
9
-OUTPUT (2)
10
+ OUTPUT (2)
Typcial Weight: 235 Grams

 

Series F / M/ HP
High Voltage
100 Volts and Above

NOTE: The torque for mounting screws must be 6 to 9 In-Lbs.

PIN No.
HIGH VOLTAGE
1
+ INPUT
2
TRIM DOWN
3
TRIM
4
TRIM UP
5
SHUT DOWN
6
-INPUT
7
-OUTPUT
8
+OUTPUT
Typical Weight: 220 Grams

 

*Typical Resistance Range for Trim Up and Trim Down
% 1 2 3 5
Resistance
Trim
Trim Up
300K
150K
50K
20K
Trim Down
1M
500K
250K
100K
*These units are typical resistance values, as each individual unit will vary slightly.
Use of trim pot to determine resistance value is recommended.
Use 1/2 watt minimum power rating resistor.

 

For immediate engineering assistance or to place an order:
Call Toll Free: 800-431-1064

PICO Electronics, Inc.

143 Sparks Ave. Pelham, NY 10803-1837
Tel: 914-738-1400 or Fax: 914-738-8225