SERIES A/SM SURFACE MOUNT and PLUG-IN
Hi Reliability and Ultra-Miniature
SERIES A: Low Profile 0.5" x 0.5" x 0.30" Height! ...up to 1.25 Watts
SERIES SM: Low Profile 0.5" x 0.5" x 0.340" Height! ...up to 1.25 Watts
ALSO: New Series AT/DT 0.200 height - up to 0.75 Watts. (See table of contents)
This series of unregulated DC-DC converters are produced in an ultra-miniature encapsulated package. 178 different models are available. The units feature single and dual outputs. They will operate over the temperature range of -25º C to +70º C. No heat sink is required.
FEATURES
Options Available
|
Test conditions: 25º C ambient and input voltage at nominal value unless otherwise specified. LINE REGULATION: OUTPUT IS DIRECTLY PROPORTIONAL TO THE INPUT. Input voltage range:
Converter frequency: 20 - 40 KHz
|
SERIES A/SM - SINGLE OUTPUT |
|||||||||||
PICO
Plug-In Part Number |
PICO
Surface Mount Part Number |
Input
Volt. (V DC) |
Output
Volt. (V DC) |
Max.
Load Current (mA) |
Max.
Output Power (watts) |
Eff. @
Full Load Typical (%) |
Input
Current Full Load Typical (mA) |
Output
Voltage Ripple @ Full Load* (Vp-p max) |
No Load
Current Typical (mA) |
Full
Load Output Voltage Tolerance (V DC) |
Price
(US $) |
5A3.3S
5A5S 5A5.2S 5A9S 5A12S 5A15S 5A24S 5A28S 5A48S 5A100S 5A150S 5A200S 5A250S |
5SM3.3S
5SM5S 5SM5.2S 5SM9S 5SM12S 5SM15S 5SM24S 5SM28S 5SM48S 5SM100S 5SM150S 5SM200S 5SM250S |
5
5 5 5 5 5 5 5 5 5 5 5 5 |
3.3
5 5.2 9 12 15 24 28 48 100 150 200 250 |
303
200 192 139 104 83 52 45 26 12.5 8.3 6.25 5 |
1.00
1.00 1.00 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 |
60
66 66 73 73 75 75 74 77 78 76 75 75 |
333
303 303 342 342 333 333 338 325 321 329 333 333 |
0.20
0.20 0.20 0.15 0.15 0.12 0.10 0.10 0.10 0.90 0.90 0.90 0.90 |
80
65 65 80 80 90 90 90 90 ** ** ** ** |
±0.2
±0.25 ±0.25 ±0.3 ±0.4 ±0.4 ±0.5 ±0.5 ±0.7 ±3.0 ±4.5 ±6.0 ±7.5 |
69.28
69.28 69.28 69.28 69.28 69.28 69.28 69.28 69.28 98.15 98.15 98.15 98.15 |
12A3.3S
12A5S 12A5.2S 12A9S 12A12S 12A15S 12A24S 12A28S 12A48S 12A100S 12A150S 12A200S 12A250S |
12SM3.3S
12SM5S 12SM5.2S 12SM9S 12SM12S 12SM15S 12SM24S 12SM28S 12SM48S 12SM100S 12SM150S 12SM200S 12SM250S |
12
12 12 12 12 12 12 12 12 12 12 12 12 |
3.3
5 5.2 9 12 15 24 28 48 100 150 200 250 |
303
200 192 139 104 83 52 45 26 12.5 8.3 6.25 5 |
1.00
1.00 1.00 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 |
60
66 66 74 76 78 78 77 80 80 79 78 75 |
139
126 126 141 137 134 134 135 130 130 132 134 139 |
0.20
0.20 0.20 0.15 0.15 0.15 0.15 0.15 0.20 0.90 0.90 0.90 0.90 |
26
24 24 26 26 26 26 26 26 ** ** ** ** |
±0.2
±0.25 ±0.25 ±0.3 ±0.4 ±0.4 ±0.5 ±0.5 ±0.7 ±3.0 ±4.5 ±6.0 ±7.5 |
69.28
69.28 69.28 69.28 69.28 69.28 69.28 69.28 69.28 98.15 98.15 98.15 98.15 |
15A3.3S
15A5S 15A5.2S 15A9S 15A12S 15A15S 15A24S 15A28S 15A48S 15A100S 15A150S 15A200S 15A250S |
15SM3.3S
15SM5S 15SM5.2S 15SM9S 15SM12S 15SM15S 15SM24S 15SM28S 15SM48S 15SM100S 15SM150S 15SM200S 15SM250S |
15
15 15 15 15 15 15 15 15 15 15 15 15 |
3.3
5 5.2 9 12 15 24 28 48 100 150 200 250 |
303
200 192 139 104 83 52 45 26 12.5 8.3 6.25 5 |
1.00
1.00 1.00 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 |
60
66 66 74 76 78 78 77 80 80 79 78 75 |
111
101 101 113 110 107 107 108 104 104 105 107 111 |
0.20
0.20 0.20 0.15 0.15 0.15 0.15 0.15 0.20 0.90 0.90 0.90 0.90 |
22
20 20 20 20 20 20 20 20 ** ** ** ** |
±0.2
±0.25 ±0.25 ±0.3 ±0.4 ±0.4 ±0.5 ±0.5 ±0.7 ±3.0 ±4.5 ±6.0 ±7.5 |
69.28
69.28 69.28 69.28 69.28 69.28 69.28 69.28 69.28 98.15 98.15 98.15 98.15 |
24A3.3S
24A5S 24A5.2S 24A9S 24A12S 24A15S 24A24S 24A28S 24A48S 24A100S 24A150S 24A200S 24A250S |
24SM3.3S
24SM5S 24SM5.2S 24SM9S 24SM12S 24SM15S 24SM24S 24SM28S 24SM48S 24SM100S 24SM150S 24SM200S 24SM250S |
24
24 24 24 24 24 24 24 24 24 24 24 24 |
3.3
5 5.2 9 12 15 24 28 48 100 150 200 250 |
303
200 192 139 104 83 52 45 26 12.5 8.3 6.25 5 |
1.00
1.00 1.00 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 |
60
66 66 72 75 75 78 77 78 76 73 73 70 |
69
43 43 72 69 69 67 68 67 69 71 71 74 |
0.20
0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.25 0.90 0.90 0.90 0.90 |
16
13 13 15 15 15 15 15 16 ** ** ** ** |
±0.2
±0.25 ±0.25 ±0.3 ±0.4 ±0.4 ±0.5 ±0.5 ±0.7 ±3.0 ±4.5 ±6.0 ±7.5 |
69.28
69.28 69.28 69.28 69.28 69.28 69.28 69.28 69.28 98.15 98.15 98.15 98.15 |
28A3.3S
28A5S 28A5.2S 28A9S 28A12S 28A15S 28A24S 28A28S 28A48S 28A100S 28A150S 28A200S 28A250S |
28SM3.3S
28SM5S 28SM5.2S 28SM9S 28SM12S 28SM15S 28SM24S 28SM28S 28SM48S 28SM100S 28SM150S 28SM200S 28SM250S |
28
28 28 28 28 28 28 28 28 28 28 28 28 |
3.3
5 5.2 9 12 15 24 28 48 100 150 200 250 |
303
200 192 139 104 83 52 45 26 12.5 8.3 6.25 5 |
1.00
1.00 1.00 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 |
60
66 66 72 72 73 76 76 77 75 76 75 70 |
59
54 54 62 62 61 59 59 58 60 59 60 64 |
0.20
0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.25 0.90 0.90 0.90 0.90 |
15
12 12 14 14 14 14 14 15 ** ** ** ** |
±0.2
±0.25 ±0.25 ±0.3 ±0.4 ±0.4 ±0.5 ±0.5 ±0.7 ±3.0 ±4.5 ±6.0 ±7.5 |
69.28
69.28 69.28 69.28 69.28 69.28 69.28 69.28 69.28 98.15 98.15 98.15 98.15 |
48A3.3S
48A5S 48A5.2S 48A9S 48A12S 48A15S 48A24S 48A28S |
48SM3.3S
48SM5S 48SM5.2S 48SM9S 48SM12S 48SM15S 48SM24S 48SM28S |
48
48 48 48 48 48 48 48 |
3.3
5 5.2 9 12 15 24 28 |
303
200 192 139 104 83 52 45 |
1.00
1.00 1.00 1.25 1.25 1.25 1.25 1.25 |
60
66 66 72 73 72 76 76 |
35
32 32 36 36 36 34 34 |
0.20
0.25 0.25 0.25 0.25 0.25 0.25 0.25 |
5
6 6 8 8 8 9 9 |
±0.2
±0.25 ±0.25 ±0.3 ±0.4 ±0.4 ±0.5 ±0.5 |
74.36
74.36 74.36 74.36 74.36 74.36 74.36
74.36 |
* For units with output voltages up to 48 volts, ripple is measured with 10µF, 75 volt high quality tantalum capacitor which is required across the output. * For units with output voltage of 100-250 volts use a 0.1µF, 500 volt capacitor which is required across output, and maintain at least 10% of rated load to prevent a voltage surge. ** Maintain minimum 10% of rated load to prevent a voltage surge |
SERIES A/SM - DUAL OUTPUT |
|||||||||||
PICO
Plug-In Part Number |
PICO
Surface Mount Part Number |
Input
Volt. (V DC) |
Output
Volt. (V DC) |
Max.
Load Current (mA) |
Max.
Output Power (watts) |
Eff. @
Full Load Typical (%) |
Input
Current Full Load Typical (mA) |
Output
Voltage Ripple @ Full Load* (Vp-p max) |
No Load
Current Typical (mA) |
Full
Load Output Voltage Tolerance (V DC) |
Price
(US $) |
5A5D
5A9D 5A12D 5A15D 5A24D 5A28D 5A48D |
5SM5D
5SM9D 5SM12D 5SM15D 5SM24D 5SM28D 5SM48D |
5
5 5 5 5 5 5 |
±5
±9 ±12 ±15 ±24 ±28 ±48 |
100
69 52 42 26 22 13 |
0.5
0.625 0.625 0.625 0.625 0.625 0.625 |
66
73 73 75 75 74 77 |
303
342 342 333 333 338 325 |
0.20
0.15 0.15 0.12 0.10 0.10 0.10 |
65
80 80 90 90 90 90 |
±0.25
±0.3 ±0.4 ±0.4 ±0.5 ±0.5 ±0.7 |
78.32
78.32 78.32 78.32 78.32
78.32 78.32 |
12A5D
12A9D 12A12D 12A15D 12A24D 12A28D 12A48D |
12SM5D
12SM9D 12SM12D 12SM15D 12SM24D 12SM28D 12SM48D |
12
12 12 12 12 12 12 |
±5
±9 ±12 ±15 ±24 ±28 ±48 |
100
69 52 42 26 22 13 |
0.5
0.625 0.625 0.625 0.625 0.625 0.625 |
66
74 76 78 78 77 80 |
126
141 137 134 134 135 130 |
0.20
0.15 0.15 0.15 0.15 0.15 0.20 |
24
26 26 26 26 26 26 |
±0.25
±0.3 ±0.4 ±0.4 ±0.5 ±0.5 ±0.7 |
78.32
78.32 78.32 78.32
78.32 78.32 78.32
|
15A5D
15A9D 15A12D 15A15D 15A24D 15A28D 15A48D |
15SM5D
15SM9D 15SM12D 15SM15D 15SM24D 15SM28D 15SM48D |
15
15 15 15 15 15 15 |
±5
±9 ±12 ±15 ±24 ±28 ±48 |
100
69 52 42 26 22 13 |
0.5
0.625 0.625 0.625 0.625 0.625 0.625 |
66
74 76 78 78 77 80 |
101
113 110 107 107 108 104 |
0.20
0.15 0.15 0.15 0.15 0.15 0.20 |
20
20 20 20 20 20 20 |
±0.25
±0.3 ±0.4 ±0.4 ±0.5 ±0.5 ±0.7 |
78.32
78.32 78.32 78.32
78.32 78.32 78.32
|
24A5D
24A9D 24A12D 24A15D 24A24D 24A28D 24A48D |
24SM5D
24SM9D 24SM12D 24SM15D 24SM24D 24SM28D 24SM48D |
24
24 24 24 24 24 24 |
±5
±9 ±12 ±15 ±24 ±28 ±48 |
100
69 52 42 26 22 13 |
0.5
0.625 0.625 0.625 0.625 0.625 0.625 |
66
72 75 75 78 77 78 |
63
72 69 69 67 68 67 |
0.20
0.20 0.20 0.20 0.20 0.20 0.25 |
13
15 15 15 15 15 16 |
±0.25
±0.3 ±0.4 ±0.4 ±0.5 ±0.5 ±0.7 |
78.32
78.32 78.32 78.32
78.32 78.32 78.32
|
28A5D
28A9D 28A12D 28A15D 28A24D 28A28D 28A48D |
28SM5D
28SM9D 28SM12D 28SM15D 28SM24D 28SM28D 28SM48D |
28
28 28 28 28 28 28 |
±5
±9 ±12 ±15 ±24 ±28 ±48 |
100
69 52 42 26 22 13 |
0.5
0.625 0.625 0.625 0.625 0.625 0.625 |
66
72 72 73 76 76 77 |
54
62 62 61 59 59 58 |
0.20
0.20 0.20 0.20 0.20 0.20 0.25 |
12
14 14 14 14 14 15 |
±0.25
±0.3 ±0.4 ±0.4 ±0.5 ±0.5 ±0.7 |
78.32
78.32 78.32 78.32
78.32 78.32 78.32
|
48A5D
48A9D 48A12D 48A15D 48A24D 48A28D |
48SM5D
48SM9D 48SM12D 48SM15D 48SM24D 48SM28D |
48
48 48 48 48 48 |
±5
±9 ±12 ±15 ±24 ±28 |
100
69 52 42 26 22 |
0.5
0.625 0.625 0.625 0.625 0.625 |
66
72 73 72 76 76 |
32
36 36 36 34 34 |
0.25
0.25 0.25 0.25 0.25 0.25 |
6
8 8 8 9 9 |
±0.25
±0.3 ±0.4 ±0.4 ±0.5 ±0.5 |
84.07
84.07 84.07 84.07
84.07 84.07 |
* For units with output voltages up to 48 volts, ripple is measured with 10µF, 75 volt high quality tantalum capacitor which is required across each output. Ordering Instructions: No minimum. Net 30 days F.O.B. Pelham, New York Delivery--Sample orders typically ship within two weeks |
Series A/SM Single Output
+FOR OUTPUT VOLTAGES OF 48VDC and BELOW
|
||
Series A Single Output
48 VDC and below |
Typical Weight: 3.5 Grams
|
Series SM Single Output
48 VDC and below |
Series A/SM Single Output
FOR OUTPUT VOLTAGES OF 100 VDC and ABOVE |
||
Series A Single Output
100 VDC and above |
Typical Weight: 3.5 Grams |
Series SM Single Output
100 VDC and above |
Series A/SM Dual Output |
||
Series A Dual Output
|
Typical Weight: 3.5 Grams
|
Series SM Dual Output
|
Note: White Dot on top unit indicates + input.
SINGLE & DUAL 12V - 5V
|
SINGLE & DUAL 5V - 48V
|
SINGLE & DUAL 5V - 5V
|
SINGLE & DUAL 12V - 48V
|
RECOMMENDED LAND PATTERN DIMENSIONS
SERIES SM
|
For immediate engineering assistance or to place an order:
Call Toll Free: 800-431-1064
PICO Electronics, Inc.
143 Sparks Ave. Pelham, NY 10803-1810
Tel: 914-738-1400 or Fax: 914-738-8225