The R and 82000 & CSR series are ultra-miniature transformers in an encapsulated package with design layouts as through-hole or surface mount types. They can operate over a wide temperature range of -55°C to +130°C. Our proprietary materials and methods allow extreme temperatures of vapor phase, IR or other reflow procedures without degrading the high reliability of their physical form and electrical performance.
Mounting
Maximum Power (W)
Primary Impedance (Ω)
Secondary Impedance (Ω)
| Part Number | Mounting | Frequency Range (±3 dB) | ≥ 1kHz Maximum Power (W) | ≥ 300Hz Power (W) | ≥ 75Hz Power (W) | Primary Impedance (Ω) | Secondary Impedance (Ω) | Turns Ratio (Prim/Sec) Series Connection | Turns Ratio (Prim/Sec) Parallel Connection | Primary Unbalanced DC Current (mA) | Primary DC Resistance (Ω) | Secondary DC Resistance (Ω) Series | Secondary DC Resistance (Ω) Parallel | Size (L x W x H) inches | Size (D x H) inches | Downloads |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| R-20620 | Through Hole | 75 Hz to 30 KHz | 0.07 | 0.07 | 0.03 | 135,000 | 82 | 40.6:1 | 81.2:1 | 0.2 | 10800 | 7.8 | 1.9 | – | 0.75″ x 0.38″ | |
| R-20615 | Through Hole | 75 Hz to 30 KHz | 0.1 | 0.1 | 0.03 | 100,000 | 10,000 | 3.16:1 | 6.32:1 | 0.3 | 8000 | 950 | 238 | – | 0.75″ x 0.38″ | |
| R-20614 | Through Hole | 75 Hz to 30 KHz | 0.1 | 0.1 | 0.03 | 100,000 | 2000 | 7.07:1 | 14.14:1 | 0.3 | 8000 | 190 | 47.5 | – | 0.75″ x 0.38″ | |
| R-20613 | Through Hole | 75 Hz to 30 KHz | 0.1 | 0.1 | 0.03 | 100,000 | 1000 | 10:1 | 20:1 | 0.3 | 8000 | 95 | 23.8 | – | 0.75″ x 0.38″ | |
| R-20610 | Through Hole | 75 Hz to 30 KHz | 0.1 | 0.1 | 0.03 | 100,000 | 500 | 14.1:1 | 28.3:1 | 0.3 | 8000 | 47.5 | 11.88 | – | 0.75″ x 0.38″ | |
| R-20605 | Through Hole | 75 Hz to 30 KHz | 0.1 | 0.1 | 0.03 | 100,000 | 100 | 31.6:1 | 63.2:1 | 0.3 | 8000 | 9.5 | 2.38 | – | 0.75″ x 0.38″ | |
| R-20600 | Through Hole | 75 Hz to 30 KHz | 0.1 | 0.1 | 0.03 | 100,000 | 60 | 40.8:1 | 81.6:1 | 0.3 | 8000 | 5.7 | 1.43 | – | 0.75″ x 0.38″ | |
| R-20595 | Through Hole | 75 Hz to 30 KHz | 0.1 | 0.1 | 0.03 | 95,000 | 15,000 | 2.5:1 | 5:1 | 0.3 | 7600 | 1430 | 358 | – | 0.75″ x 0.38″ | |
| R-20590 | Through Hole | 75 Hz to 30 KHz | 0.11 | 0.11 | 0.03 | 90,000 | 10,000 | 3:1 | 6:1 | 0.3 | 7200 | 950 | 238 | – | 0.75″ x 0.38″ | |
| R-20587 | Through Hole | 75 Hz to 30 KHz | 0.12 | 0.12 | 0.03 | 80,000 | 15,000 | 2.3:1 | 4.6:1 | 0.3 | 6400 | 1430 | 358 | – | 0.75″ x 0.38″ | |
| R-20585 | Through Hole | 75 Hz to 30 KHz | 0.16 | 0.16 | 0.03 | 62,500 | 50 | 35.4:1 | 70.7:1 | 0.4 | 5000 | 4.75 | 1.19 | – | 0.75″ x 0.38″ | |
| R-20580 | Through Hole | 75 Hz to 30 KHz | 0.16 | 0.16 | 0.03 | 60,000 | 15,000 | 2:1 | 4:1 | 0.4 | 4800 | 1430 | 358 | – | 0.75″ x 0.38″ | |
| R-20579 | Through Hole | 75 Hz to 30 KHz | 0.2 | 0.2 | 0.03 | 50,000 | 50,000 | 1:1 | 2:1 | 0.4 | 4000 | 4750 | 1190 | – | 0.75″ x 0.38″ | |
| R-20578 | Through Hole | 75 Hz to 30 KHz | 0.2 | 0.2 | 0.03 | 50,000 | 600 | 9.13:1 | 18.26:1 | 0.4 | 4000 | 57 | 14.3 | – | 0.75″ x 0.38″ | |
| R-20577 | Through Hole | 75 Hz to 30 KHz | 0.2 | 0.2 | 0.03 | 50,000 | 500 | 10:1 | 20:1 | 0.4 | 4000 | 47.5 | 11.88 | – | 0.75″ x 0.38″ | |
| R-20575 | Through Hole | 75 Hz to 30 KHz | 0.2 | 0.2 | 0.03 | 50,000 | 200 | 15.8:1 | 31.6:1 | 0.4 | 4000 | 19 | 4.75 | – | 0.75″ x 0.38″ | |
| R-20570 | Through Hole | 75 Hz to 30 KHz | 0.25 | 0.25 | 0.03 | 40,000 | 40,000 | 1:1 | – | 0.5 | 3200 | 3800 | – | – | 0.75″ x 0.38″ | |
| R-20565 | Through Hole | 75 Hz to 30 KHz | 0.25 | 0.25 | 0.03 | 40,000 | 20,000 | 1.41:1 | 2.83:1 | 0.5 | 3200 | 1900 | 475 | – | 0.75″ x 0.38″ | |
| R-20560 | Through Hole | 75 Hz to 30 KHz | 0.25 | 0.25 | 0.03 | 40,000 | 4000 | 3.16:1 | 6.32:1 | 0.5 | 3200 | 380 | 95 | – | 0.75″ x 0.38″ | |
| R-20555 | Through Hole | 75 Hz to 30 KHz | 0.25 | 0.25 | 0.03 | 40,000 | 2000 | 4.47:1 | 8.94:1 | 0.5 | 3200 | 190 | 47.5 | – | 0.75″ x 0.38″ | |
| R-20550 | Through Hole | 75 Hz to 30 KHz | 0.25 | 0.25 | 0.03 | 40,000 | 400 | 10:1 | 20:1 | 0.5 | 3200 | 38 | 9.5 | – | 0.75″ x 0.38″ | |
| R-20545 | Through Hole | 75 Hz to 30 KHz | 0.33 | 0.33 | 0.03 | 30,000 | 30,000 | 1:1 | – | 0.6 | 2400 | 2850 | – | – | 0.75″ x 0.38″ | |
| R-20540 | Through Hole | 75 Hz to 30 KHz | 0.33 | 0.33 | 0.03 | 30,000 | 10,000 | 1.73:1 | 3.46:1 | 0.6 | 2400 | 950 | 238 | – | 0.75″ x 0.38″ | |
| R-20535 | Through Hole | 75 Hz to 30 KHz | 0.33 | 0.33 | 0.03 | 30,000 | 5000 | 2.45:1 | 4.9:1 | 0.6 | 2400 | 475 | 119 | – | 0.75″ x 0.38″ | |
| R-20534 | Through Hole | 75 Hz to 30 KHz | 0.33 | 0.33 | 0.03 | 30,000 | 200 | 12.2:1 | 24.5:1 | 0.6 | 2400 | 19 | 4.75 | – | 0.75″ x 0.38″ | |
| R-20532 | Through Hole | 75 Hz to 30 KHz | 0.33 | 0.33 | 0.03 | 30,000 | 500 | 7.7:1 | 15.5:1 | 0.6 | 2400 | 47.5 | 11.88 | – | 0.75″ x 0.38″ | |
| R-20530 | Through Hole | 75 Hz to 30 KHz | 0.33 | 0.33 | 0.03 | 30,000 | 1200 | 5:1 | 10:1 | 0.6 | 2400 | 114 | 28.5 | – | 0.75″ x 0.38″ | |
| R-20525 | Through Hole | 75 Hz to 30 KHz | 0.33 | 0.33 | 0.03 | 30,000 | 50 | 24.5:1 | 49:1 | 0.6 | 2400 | 4.75 | 1.19 | – | 0.75″ x 0.38″ | |
| R-20520 | Through Hole | 75 Hz to 30 KHz | 0.4 | 0.4 | 0.03 | 25,000 | 1000 | 5:1 | 10:1 | 0.6 | 2000 | 95 | 23.8 | – | 0.75″ x 0.38″ | |
| R-20515 | Through Hole | 75 Hz to 30 KHz | 0.4 | 0.4 | 0.03 | 25,000 | 500 | 7.07:1 | 14.14:1 | 0.6 | 2000 | 47.5 | 11.88 | – | 0.75″ x 0.38″ | |
| R-20510 | Through Hole | 75 Hz to 30 KHz | 0.5 | 0.5 | 0.03 | 20,000 | 20,000 | 1:1 | – | 0.7 | 1600 | 1900 | – | – | 0.75″ x 0.38″ | |
| R-20505 | Through Hole | 75 Hz to 30 KHz | 0.5 | 0.5 | 0.03 | 20,000 | 10,000 | 1.41:1 | 2.83:1 | 0.7 | 1600 | 950 | 238 | – | 0.75″ x 0.38″ | |
| R-20500 | Through Hole | 75 Hz to 30 KHz | 0.5 | 0.5 | 0.03 | 20,000 | 5000 | 2:1 | 4:1 | 0.7 | 1600 | 475 | 119 | – | 0.75″ x 0.38″ | |
| R-20495 | Through Hole | 75 Hz to 30 KHz | 0.5 | 0.5 | 0.03 | 20,000 | 1000 | 4.47:1 | 8.94:1 | 0.7 | 1600 | 95 | 23.8 | – | 0.75″ x 0.38″ | |
| R-20490 | Through Hole | 75 Hz to 30 KHz | 0.5 | 0.5 | 0.03 | 20,000 | 800 | 5:1 | 10:1 | 0.7 | 1600 | 76 | 19 | – | 0.75″ x 0.38″ | |
| R-20485 | Through Hole | 75 Hz to 30 KHz | 0.5 | 0.5 | 0.03 | 20,000 | 600 | 5.77:1 | 11.55:1 | 0.7 | 1600 | 57 | 14.25 | – | 0.75″ x 0.38″ | |
| R-20480 | Through Hole | 75 Hz to 30 KHz | 0.5 | 0.5 | 0.03 | 20,000 | 500 | 6.32:1 | 12.65:1 | 0.7 | 1600 | 47.5 | 11.88 | – | 0.75″ x 0.38″ | |
| R-20475 | Through Hole | 75 Hz to 30 KHz | 0.62 | 0.62 | 0.03 | 16,000 | 1000 | 4:1 | 8:1 | 0.8 | 1280 | 95 | 23.8 | – | 0.75″ x 0.38″ | |
| R-20470 | Through Hole | 75 Hz to 30 KHz | 0.66 | 0.66 | 0.03 | 15,000 | 15,000 | 1:1 | 2:1 | 0.8 | 1200 | 1430 | 357 | – | 0.75″ x 0.38″ | |
| R-20465 | Through Hole | 75 Hz to 30 KHz | 0.66 | 0.66 | 0.03 | 15,000 | 15,000 | 1:1 | – | 0.8 | 1200 | 1430 | – | – | 0.75″ x 0.38″ | |
| R-20460 | Through Hole | 75 Hz to 30 KHz | 0.66 | 0.66 | 0.03 | 15,000 | 10,000 | 1.22:1 | 2.45:1 | 0.8 | 1200 | 950 | 238 | – | 0.75″ x 0.38″ | |
| R-20455 | Through Hole | 75 Hz to 30 KHz | 0.66 | 0.66 | 0.03 | 15,000 | 600 | 5:1 | 10:1 | 0.8 | 1200 | 57 | 14.3 | – | 0.75″ x 0.38″ | |
| R-20452 | Through Hole | 75 Hz to 30 KHz | 0.66 | 0.66 | 0.03 | 15,000 | 500 | 5.48:1 | 10.95:1 | 0.8 | 1200 | 48 | 12 | – | 0.75″ x 0.38″ | |
| R-20450 | Through Hole | 75 Hz to 30 KHz | 0.66 | 0.66 | 0.03 | 15,000 | 400 | 6.12:1 | 12.25:1 | 0.8 | 1200 | 38 | 9.5 | – | 0.75″ x 0.38″ | |
| R-20445 | Through Hole | 75 Hz to 30 KHz | 1 | 0.9 | 0.03 | 10,000 | 10,000 | 1:1 | – | 1 | 800 | 950 | – | – | 0.75″ x 0.38″ | |
| R-20440 | Through Hole | 75 Hz to 30 KHz | 1 | 0.9 | 0.03 | 10,000 | 10,000 | 1:1 | 2:1 | 1 | 800 | 950 | 238 | – | 0.75″ x 0.38″ | |
| R-20435 | Through Hole | 75 Hz to 30 KHz | 1 | 0.9 | 0.03 | 10,000 | 7500 | 1.16:1 | 2.31:1 | 1 | 800 | 713 | 178 | – | 0.75″ x 0.38″ | |
| R-20430 | Through Hole | 75 Hz to 30 KHz | 1 | 0.9 | 0.03 | 10,000 | 5000 | 1.41:1 | 2.83:1 | 1 | 800 | 475 | 119 | – | 0.75″ x 0.38″ | |
| R-20425 | Through Hole | 75 Hz to 30 KHz | 1 | 0.9 | 0.03 | 10,000 | 2000 | 2.24:1 | 4.47:1 | 1 | 800 | 190 | 47.5 | – | 0.75″ x 0.38″ | |
| R-20420 | Through Hole | 75 Hz to 30 KHz | 1 | 0.9 | 0.03 | 10,000 | 1500 | 2.58:1 | 5.16:1 | 1 | 800 | 143 | 35.8 | – | 0.75″ x 0.38″ | |
| R-20415 | Through Hole | 75 Hz to 30 KHz | 1 | 0.9 | 0.03 | 10,000 | 1200 | 2.89:1 | 5.77:1 | 1 | 800 | 114 | 28.5 | – | 0.75″ x 0.38″ | |
| R-20410 | Through Hole | 75 Hz to 30 KHz | 1 | 0.9 | 0.03 | 10,000 | 1000 | 3.16:1 | 6.32:1 | 1 | 800 | 95 | 23.8 | – | 0.75″ x 0.38″ | |
| R-20405 | Through Hole | 75 Hz to 30 KHz | 1 | 0.9 | 0.03 | 10,000 | 600 | 4.08:1 | 8.16:1 | 1 | 800 | 57 | 14.25 | – | 0.75″ x 0.38″ | |
| R-20400 | Through Hole | 75 Hz to 30 KHz | 1 | 0.9 | 0.03 | 10,000 | 500 | 4.47:1 | 8.94:1 | 1 | 800 | 47.5 | 11.88 | – | 0.75″ x 0.38″ | |
| R-20395 | Through Hole | 75 Hz to 30 KHz | 1 | 0.9 | 0.03 | 10,000 | 200 | 7.07:1 | 14.14:1 | 1 | 800 | 19 | 4.75 | – | 0.75″ x 0.38″ | |
| R-20390 | Through Hole | 75 Hz to 30 KHz | 1 | 0.9 | 0.03 | 10,000 | 100 | 10:1 | 20:1 | 1 | 800 | 9.5 | 2.38 | – | 0.75″ x 0.38″ | |
| R-20385 | Through Hole | 75 Hz to 30 KHz | 1 | 0.9 | 0.03 | 10,000 | 16 | 25:1 | 50:1 | 1 | 800 | 1.52 | 0.38 | – | 0.75″ x 0.38″ | |
| R-20380 | Through Hole | 75 Hz to 30 KHz | 1 | 0.9 | 0.03 | 10,000 | 12.8 | 28:1 | 56:1 | 1 | 800 | 1.22 | 0.3 | – | 0.75″ x 0.38″ | |
| R-20375 | Through Hole | 75 Hz to 30 KHz | 1.1 | 0.9 | 0.03 | 9000 | 9000 | 1:1 | – | 1.1 | 720 | 855 | – | – | 0.75″ x 0.38″ | |
| R-20370 | Through Hole | 75 Hz to 30 KHz | 1.2 | 0.9 | 0.03 | 8000 | 1200 | 2.58:1 | – | 1.1 | 640 | 114 | – | – | 0.75″ x 0.38″ | |
| R-20365 | Through Hole | 75 Hz to 30 KHz | 1.2 | 0.9 | 0.03 | 8000 | 1000 | 2.83:1 | 5.66:1 | 1.1 | 640 | 95 | 23.8 | – | 0.75″ x 0.38″ | |
| R-20360 | Through Hole | 75 Hz to 30 KHz | 1.2 | 0.9 | 0.03 | 8000 | 12.8 | 25:1 | 50:1 | 1.1 | 640 | 1.22 | 0.3 | – | 0.75″ x 0.38″ | |
| R-20355 | Through Hole | 75 Hz to 30 KHz | 1.3 | 0.9 | 0.03 | 7500 | 7500 | 1:1 | – | 1.2 | 600 | 713 | – | – | 0.75″ x 0.38″ | |
| R-20350 | Through Hole | 75 Hz to 30 KHz | 1.3 | 0.9 | 0.03 | 7500 | 2500 | 1.73:1 | 3.46:1 | 1.2 | 600 | 238 | 59.5 | – | 0.75″ x 0.38″ | |
| R-20345 | Through Hole | 75 Hz to 30 KHz | 1.3 | 0.9 | 0.03 | 7500 | 600 | 3.54:1 | 7.07:1 | 1.2 | 600 | 57 | 14.3 | – | 0.75″ x 0.38″ | |
| R-20340 | Through Hole | 75 Hz to 30 KHz | 1.3 | 0.9 | 0.03 | 7500 | 100 | 8.66:1 | 17.32:1 | 1.2 | 600 | 9.5 | 2.38 | – | 0.75″ x 0.38″ | |
| R-20335 | Through Hole | 75 Hz to 30 KHz | 1.3 | 0.9 | 0.03 | 7500 | 50 | 12.25:1 | 24.5:1 | 1.2 | 600 | 4.75 | 1.19 | – | 0.75″ x 0.38″ | |
| R-20330 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 5000 | 5000 | 1:1 | 2:1 | 1.4 | 400 | 475 | 119 | – | 0.75″ x 0.38″ | |
| R-20325 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 5000 | 500 | 3.16:1 | 6.32:1 | 1.4 | 400 | 47.5 | 11.88 | – | 0.75″ x 0.38″ | |
| R-20320 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 4000 | 8000 | 1:1.41 | – | 1.6 | 320 | 760 | – | – | 0.75″ x 0.38″ | |
| R-20315 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 4000 | 1000 | 2:1 | 4:1 | 1.6 | 320 | 95 | 23.8 | – | 0.75″ x 0.38″ | |
| R-20314 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 4000 | 600 | 2.58:1 | 5.16:1 | 1.6 | 320 | 57 | 14.3 | – | 0.75″ x 0.38″ | |
| R-20312 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 4000 | 16 | 15.8:1 | 31.6:1 | 1.6 | 320 | 1.52 | 0.38 | – | 0.75″ x 0.38″ | |
| R-20310 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 3600 | 3600 | 1:1 | 2:1 | 1.7 | 288 | 342 | 86 | – | 0.75″ x 0.38″ | |
| R-20305 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 3000 | 3000 | 1:1 | – | 1.8 | 240 | 285 | – | – | 0.75″ x 0.38″ | |
| R-20300 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 3000 | 3000 | 1:1 | 2:1 | 1.8 | 240 | 285 | 71.3 | – | 0.75″ x 0.38″ | |
| R-20297 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 2500 | 2500 | 1:1 | 2:1 | 2 | 200 | 238 | 59.5 | – | 0.75″ x 0.38″ | |
| R-20295 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 2000 | 8000 | 1:2 | 1:1 | 2.2 | 160 | 760 | 190 | – | 0.75″ x 0.38″ | |
| R-20290 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 2000 | 2000 | 1:1 | – | 2.2 | 160 | 190 | – | – | 0.75″ x 0.38″ | |
| R-20285 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 2000 | 2000 | 1:1 | 2:1 | 2.2 | 160 | 190 | 47.5 | – | 0.75″ x 0.38″ | |
| R-20283 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 2000 | 8 | 15.8:1 | 31.6:1 | 2.2 | 160 | 0.76 | 0.19 | – | 0.75″ x 0.38″ | |
| R-20280 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 1600 | 12.8 | 11.18:1 | 22.36:1 | 2.5 | 128 | 1.22 | 3 | – | 0.75″ x 0.38″ | |
| R-20275 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 1500 | 1500 | 1:1 | – | 2.5 | 120 | 142 | – | – | 0.75″ x 0.38″ | |
| R-20270 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 1500 | 600 | 1.58:1 | – | 2.5 | 120 | 57 | – | – | 0.75″ x 0.38″ | |
| R-20265 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 1500 | 500 | 1.73:1 | 3.46:1 | 2.5 | 120 | 47.5 | 11.88 | – | 0.75″ x 0.38″ | |
| R-20260 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 1500 | 12 | 11.18:1 | 22.36:1 | 2.5 | 120 | 1.14 | 0.29 | – | 0.75″ x 0.38″ | |
| R-20255 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 1200 | 1200 | 1:1 | – | 3 | 96 | 114 | – | – | 0.75″ x 0.38″ | |
| R-20250 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 1200 | 1200 | 1:1 | 2:1 | 3 | 96 | 114 | 28.5 | – | 0.75″ x 0.38″ | |
| R-20245 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 1200 | 500 | 1.55:1 | 3.1:1 | 3 | 96 | 47.5 | 11.88 | – | 0.75″ x 0.38″ | |
| R-20240 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 1200 | 12.8 | 9.68:1 | 19.4:1 | 3 | 96 | 1.22 | 0.3 | – | 0.75″ x 0.38″ | |
| R-20235 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 1060 | 12.8 | 9.1:1 | 18.2:1 | 3 | 85 | 1.22 | 0.3 | – | 0.75″ x 0.38″ | |
| R-20230 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 1000 | 1000 | 1:1 | 2:1 | 3 | 80 | 95 | 23.8 | – | 0.75″ x 0.38″ | |
| R-20225 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 1000 | 50 | 4.47:1 | 8.94:1 | 3 | 80 | 4.75 | 1.19 | – | 0.75″ x 0.38″ | |
| R-20220 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 1000 | 12 | 9.13:1 | 18.26:1 | 3 | 80 | 1.14 | 0.29 | – | 0.75″ x 0.38″ | |
| R-20217 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 900 | 900 | 1:1 | – | 3 | 72 | 85.5 | – | – | 0.75″ x 0.38″ | |
| R-20215 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 900 | 600 | 1.23:1 | 2.45:1 | 3 | 72 | 57 | 14.3 | – | 0.75″ x 0.38″ | |
| R-20210 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 800 | 800 | 1:1 | 2:1 | 3.5 | 64 | 76 | 19 | – | 0.75″ x 0.38″ | |
| R-20205 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 800 | 48 | 4.08:1 | 8.16:1 | 3.5 | 64 | 4.56 | 1.14 | – | 0.75″ x 0.38″ | |
| R-20200 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 800 | 12.8 | 7.91:1 | 15.8:1 | 3.5 | 64 | 1.22 | 0.3 | – | 0.75″ x 0.38″ | |
| R-20195 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 700 | 100 | 2.65:1 | 5.29:1 | 3.5 | 56 | 9.5 | 2.38 | – | 0.75″ x 0.38″ | |
| R-20190 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 640 | 12.8 | 7.07:1 | 14.14:1 | 4 | 51.2 | 1.22 | 0.3 | – | 0.75″ x 0.38″ | |
| R-20187 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 600 | 1200 | 1:1.41 | 1.41:1 | 4 | 48 | 114 | 28.5 | – | 0.75″ x 0.38″ | |
| R-20186 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 600 | 900 | 1:1.22 | – | 4 | 48 | 85.5 | – | – | 0.75″ x 0.38″ | |
| R-20185 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 600 | 600 | 1:1 | – | 4 | 48 | 57 | – | – | 0.75″ x 0.38″ | |
| R-20180 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 600 | 600 | 1:1 | 2:1 | 4 | 48 | 57 | 14.25 | – | 0.75″ x 0.38″ | |
| R-20175 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 600 | 200 | 1.73:1 | 3.46:1 | 4 | 48 | 19 | 4.75 | – | 0.75″ x 0.38″ | |
| R-20170 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 600 | 48 | 3.54:1 | 7.07:1 | 4 | 48 | 4.56 | 1.14 | – | 0.75″ x 0.38″ | |
| R-20167 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 600 | 30 | 4.47:1 | 8.94:1 | 4 | 48 | 2.85 | 0.71 | – | 0.75″ x 0.38″ | |
| R-20165 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 600 | 12.8 | 6.85:1 | 13.7:1 | 4 | 48 | 1.22 | 0.3 | – | 0.75″ x 0.38″ | |
| R-20160 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 500 | 600 | 1:1.1 | 1.83:1 | 4.5 | 40 | 57 | 14.25 | – | 0.75″ x 0.38″ | |
| R-20155 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 500 | 500 | 1:1 | – | 4.5 | 40 | 47.5 | – | – | 0.75″ x 0.38″ | |
| R-20150 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 500 | 500 | 1:1 | 2:1 | 4.5 | 40 | 47.5 | 11.88 | – | 0.75″ x 0.38″ | |
| R-20147 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 500 | 150 | 1.83:1 | 3.65:1 | 4.5 | 40 | 14.25 | 3.56 | – | 0.75″ x 0.38″ | |
| R-20145 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 500 | 50 | 3.16:1 | 6.32:1 | 4.5 | 40 | 4.75 | 1.19 | – | 0.75″ x 0.38″ | |
| R-20144 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 500 | 16 | 5.6:1 | 11.2:1 | 4.5 | 40 | 1.52 | 0.38 | – | 0.75″ x 0.38″ | |
| R-20142 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 500 | 12.8 | 6.25:1 | 12.5:1 | 4.5 | 40 | 1.22 | 0.3 | – | 0.75″ x 0.38″ | |
| R-20140 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 400 | 4000 | 1:3.16 | 1:1.58 | 5 | 32 | 380 | 95 | – | 0.75″ x 0.38″ | |
| R-20135 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 400 | 2000 | 1:2.24 | 1:1.12 | 5 | 32 | 190 | 47.5 | – | 0.75″ x 0.38″ | |
| R-20130 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 400 | 1000 | 1:1.58 | 1.26:1 | 5 | 32 | 95 | 23.8 | – | 0.75″ x 0.38″ | |
| R-20125 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 400 | 400 | 1:1 | 2:1 | 5 | 32 | 38 | 9.5 | – | 0.75″ x 0.38″ | |
| R-20120 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 400 | 200 | 1.41:1 | 2.83:1 | 5 | 32 | 19 | 4.75 | – | 0.75″ x 0.38″ | |
| R-20115 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 400 | 120 | 1.83:1 | 3.65:1 | 5 | 32 | 11.4 | 2.85 | – | 0.75″ x 0.38″ | |
| R-20110 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 400 | 40 | 3.16:1 | 6.32:1 | 5 | 32 | 3.8 | 0.95 | – | 0.75″ x 0.38″ | |
| R-20105 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 320 | 12.8 | 5:1 | 10:1 | 5.5 | 25.6 | 1.22 | 0.3 | – | 0.75″ x 0.38″ | |
| R-20100 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 300 | 600 | 1:1.41 | 1.41:1 | 5.5 | 24 | 57 | 14.25 | – | 0.75″ x 0.38″ | |
| R-20095 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 300 | 300 | 1:1 | 2:1 | 5.5 | 24 | 28.5 | 7.13 | – | 0.75″ x 0.38″ | |
| R-20090 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 300 | 150 | 1.41:1 | 2.83:1 | 5.5 | 24 | 14.25 | 3.56 | – | 0.75″ x 0.38″ | |
| R-20085 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 300 | 50 | 2.45:1 | 4.9:1 | 5.5 | 24 | 4.75 | 1.19 | – | 0.75″ x 0.38″ | |
| R-20080 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 300 | 12 | 5:1 | 10:1 | 5.5 | 24 | 1.14 | 0.29 | – | 0.75″ x 0.38″ | |
| R-20075 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 200 | 200 | 1:1 | 2:1 | 7 | 16 | 19 | 4.75 | – | 0.75″ x 0.38″ | |
| R-20070 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 150 | 600 | 1:2 | 1:1 | 8 | 12 | 57 | 14.3 | – | 0.75″ x 0.38″ | |
| R-20065 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 150 | 150 | 1:1 | 2:1 | 8 | 12 | 14.3 | 3.56 | – | 0.75″ x 0.38″ | |
| R-20060 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 150 | 100 | 1.22:1 | 2.44:1 | 8 | 12 | 9.5 | 2.38 | – | 0.75″ x 0.38″ | |
| R-20055 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 150 | 50 | 1.73:1 | 3.46:1 | 8 | 12 | 4.75 | 1.19 | – | 0.75″ x 0.38″ | |
| R-20050 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 150 | 12 | 3.54:1 | 7.08:1 | 8 | 12 | 1.14 | 0.29 | – | 0.75″ x 0.38″ | |
| R-20045 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 120 | 120 | 1:1 | 2:1 | 9 | 9.6 | 11.4 | 2.85 | – | 0.75″ x 0.38″ | |
| R-20040 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 120 | 60 | 1.41:1 | 2.83:1 | 9 | 9.6 | 5.7 | 1.4 | – | 0.75″ x 0.38″ | |
| R-20035 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 120 | 12.8 | 3.06:1 | 6.12:1 | 9 | 9.6 | 1.22 | 0.3 | – | 0.75″ x 0.38″ | |
| R-20030 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 100 | 100 | 1:1 | 2:1 | 10 | 8 | 9.5 | 2.38 | – | 0.75″ x 0.38″ | |
| R-20028 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 100 | 40 | 1.58:1 | 3.16:1 | 10 | 8 | 3.8 | 0.95 | – | 0.75″ x 0.38″ | |
| R-20025 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 80 | 32 | 1.58:1 | 3.16:1 | 11 | 6.4 | 3 | 0.75 | – | 0.75″ x 0.38″ | |
| R-20020 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 50 | 50 | 1:1 | 2:1 | 14 | 4 | 4.75 | 1.19 | – | 0.75″ x 0.38″ | |
| R-20018 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 48 | 16 | 1.73:1 | 3.46:1 | 14.5 | 3.84 | 1.52 | 0.38 | – | 0.75″ x 0.38″ | |
| R-20015 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 40 | 40 | 1:1 | 2:1 | 16 | 3.2 | 3.8 | 0.95 | – | 0.75″ x 0.38″ | |
| R-20010 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 32 | 32 | 1:1 | 2:1 | 17.5 | 2.56 | 3 | 0.75 | – | 0.75″ x 0.38″ | |
| R-20005 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 20 | 20 | 1:1 | 2:1 | 22 | 1.6 | 1.9 | 0.48 | – | 0.75″ x 0.38″ | |
| R-20003 | Through Hole | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 20 | 8 | 1.58:1 | 3.16:1 | 22 | 1.6 | 0.76 | 0.19 | – | 0.75″ x 0.38″ | |
| CSR620 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 0.07 | 0.07 | 0.03 | 135,000 | 82 | 40.6:1 | 81.2:1 | 0.2 | 10800 | 7.8 | 1.9 | – | 0.75″ x 0.42″ | |
| CSR615 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 0.1 | 0.1 | 0.03 | 100,000 | 10,000 | 3.16:1 | 6.32:1 | 0.3 | 8000 | 950 | 238 | – | 0.75″ x 0.42″ | |
| CSR614 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 0.1 | 0.1 | 0.03 | 100,000 | 2000 | 7.07:1 | 14.14:1 | 0.3 | 8000 | 190 | 47.5 | – | 0.75″ x 0.42″ | |
| CSR613 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 0.1 | 0.1 | 0.03 | 100,000 | 1000 | 10:1 | 20:1 | 0.3 | 8000 | 95 | 23.8 | – | 0.75″ x 0.42″ | |
| CSR610 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 0.1 | 0.1 | 0.03 | 100,000 | 500 | 14.1:1 | 28.3:1 | 0.3 | 8000 | 47.5 | 11.88 | – | 0.75″ x 0.42″ | |
| CSR605 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 0.1 | 0.1 | 0.03 | 100,000 | 100 | 31.6:1 | 63.2:1 | 0.3 | 8000 | 9.5 | 2.38 | – | 0.75″ x 0.42″ | |
| CSR600 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 0.1 | 0.1 | 0.03 | 100,000 | 60 | 40.8:1 | 81.6:1 | 0.3 | 8000 | 5.7 | 1.43 | – | 0.75″ x 0.42″ | |
| CSR595 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 0.1 | 0.1 | 0.03 | 95,000 | 15,000 | 2.5:1 | 5:1 | 0.3 | 7600 | 1430 | 358 | – | 0.75″ x 0.42″ | |
| CSR590 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 0.11 | 0.11 | 0.03 | 90,000 | 10,000 | 3:1 | 6:1 | 0.3 | 7200 | 950 | 238 | – | 0.75″ x 0.42″ | |
| CSR587 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 0.12 | 0.12 | 0.03 | 80,000 | 15,000 | 2.3:1 | 4.6:1 | 0.3 | 6400 | 1430 | 358 | – | 0.75″ x 0.42″ | |
| CSR585 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 0.16 | 0.16 | 0.03 | 62,500 | 50 | 35.4:1 | 70.7:1 | 0.4 | 5000 | 4.75 | 1.19 | – | 0.75″ x 0.42″ | |
| CSR580 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 0.16 | 0.16 | 0.03 | 60,000 | 15,000 | 2:1 | 4:1 | 0.4 | 4800 | 1430 | 358 | – | 0.75″ x 0.42″ | |
| CSR579 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 0.2 | 0.2 | 0.03 | 50,000 | 50,000 | 1:1 | 2:1 | 0.4 | 4000 | 4750 | 1190 | – | 0.75″ x 0.42″ | |
| CSR578 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 0.2 | 0.2 | 0.03 | 50,000 | 600 | 9.13:1 | 18.26:1 | 0.4 | 4000 | 57 | 14.3 | – | 0.75″ x 0.42″ | |
| CSR577 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 0.2 | 0.2 | 0.03 | 50,000 | 500 | 10:1 | 20:1 | 0.4 | 4000 | 47.5 | 11.88 | – | 0.75″ x 0.42″ | |
| CSR575 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 0.2 | 0.2 | 0.03 | 50,000 | 200 | 15.8:1 | 31.6:1 | 0.4 | 4000 | 19 | 4.75 | – | 0.75″ x 0.42″ | |
| CSR570 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 0.25 | 0.25 | 0.03 | 40,000 | 40,000 | 1:1 | – | 0.5 | 3200 | 3800 | – | – | 0.75″ x 0.42″ | |
| CSR565 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 0.25 | 0.25 | 0.03 | 40,000 | 20,000 | 1.41:1 | 2.83:1 | 0.5 | 3200 | 1900 | 475 | – | 0.75″ x 0.42″ | |
| CSR560 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 0.25 | 0.25 | 0.03 | 40,000 | 4000 | 3.16:1 | 6.32:1 | 0.5 | 3200 | 380 | 95 | – | 0.75″ x 0.42″ | |
| CSR555 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 0.25 | 0.25 | 0.03 | 40,000 | 2000 | 4.47:1 | 8.94:1 | 0.5 | 3200 | 190 | 47.5 | – | 0.75″ x 0.42″ | |
| CSR550 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 0.25 | 0.25 | 0.03 | 40,000 | 400 | 10:1 | 20:1 | 0.5 | 3200 | 38 | 9.5 | – | 0.75″ x 0.42″ | |
| CSR545 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 0.33 | 0.33 | 0.03 | 30,000 | 30,000 | 1:1 | – | 0.6 | 2400 | 2850 | – | – | 0.75″ x 0.42″ | |
| CSR540 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 0.33 | 0.33 | 0.03 | 30,000 | 10,000 | 1.73:1 | 3.46:1 | 0.6 | 2400 | 950 | 238 | – | 0.75″ x 0.42″ | |
| CSR535 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 0.33 | 0.33 | 0.03 | 30,000 | 5000 | 2.45:1 | 4.9:1 | 0.6 | 2400 | 475 | 119 | – | 0.75″ x 0.42″ | |
| CSR534 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 0.33 | 0.33 | 0.03 | 30,000 | 200 | 12.2:1 | 24.5:1 | 0.6 | 2400 | 19 | 4.75 | – | 0.75″ x 0.42″ | |
| CSR532 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 0.33 | 0.33 | 0.03 | 30,000 | 500 | 7.7:1 | 15.5:1 | 0.6 | 2400 | 47.5 | 11.88 | – | 0.75″ x 0.42″ | |
| CSR530 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 0.33 | 0.33 | 0.03 | 30,000 | 1200 | 5:1 | 10:1 | 0.6 | 2400 | 114 | 28.5 | – | 0.75″ x 0.42″ | |
| CSR525 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 0.33 | 0.33 | 0.03 | 30,000 | 50 | 24.5:1 | 49:1 | 0.6 | 2400 | 4.75 | 1.19 | – | 0.75″ x 0.42″ | |
| CSR520 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 0.4 | 0.4 | 0.03 | 25,000 | 1000 | 5:1 | 10:1 | 0.6 | 2000 | 95 | 23.8 | – | 0.75″ x 0.42″ | |
| CSR515 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 0.4 | 0.4 | 0.03 | 25,000 | 500 | 7.07:1 | 14.14:1 | 0.6 | 2000 | 47.5 | 11.88 | – | 0.75″ x 0.42″ | |
| CSR510 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 0.5 | 0.5 | 0.03 | 20,000 | 20,000 | 1:1 | – | 0.7 | 1600 | 1900 | – | – | 0.75″ x 0.42″ | |
| CSR505 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 0.5 | 0.5 | 0.03 | 20,000 | 10,000 | 1.41:1 | 2.83:1 | 0.7 | 1600 | 950 | 238 | – | 0.75″ x 0.42″ | |
| CSR500 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 0.5 | 0.5 | 0.03 | 20,000 | 5000 | 2:1 | 4:1 | 0.7 | 1600 | 475 | 119 | – | 0.75″ x 0.42″ | |
| CSR495 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 0.5 | 0.5 | 0.03 | 20,000 | 1000 | 4.47:1 | 8.94:1 | 0.7 | 1600 | 95 | 23.8 | – | 0.75″ x 0.42″ | |
| CSR490 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 0.5 | 0.5 | 0.03 | 20,000 | 800 | 5:1 | 10:1 | 0.7 | 1600 | 76 | 19 | – | 0.75″ x 0.42″ | |
| CSR485 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 0.5 | 0.5 | 0.03 | 20,000 | 600 | 5.77:1 | 11.55:1 | 0.7 | 1600 | 57 | 14.25 | – | 0.75″ x 0.42″ | |
| CSR480 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 0.5 | 0.5 | 0.03 | 20,000 | 500 | 6.32:1 | 12.65:1 | 0.7 | 1600 | 47.5 | 11.88 | – | 0.75″ x 0.42″ | |
| CSR475 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 0.62 | 0.62 | 0.03 | 16,000 | 1000 | 4:1 | 8:1 | 0.8 | 1280 | 95 | 23.8 | – | 0.75″ x 0.42″ | |
| CSR470 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 0.66 | 0.66 | 0.03 | 15,000 | 15,000 | 1:1 | 2:1 | 0.8 | 1200 | 1430 | 357 | – | 0.75″ x 0.42″ | |
| CSR465 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 0.66 | 0.66 | 0.03 | 15,000 | 15,000 | 1:1 | – | 0.8 | 1200 | 1430 | – | – | 0.75″ x 0.42″ | |
| CSR460 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 0.66 | 0.66 | 0.03 | 15,000 | 10,000 | 1.22:1 | 2.45:1 | 0.8 | 1200 | 950 | 238 | – | 0.75″ x 0.42″ | |
| CSR455 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 0.66 | 0.66 | 0.03 | 15,000 | 600 | 5:1 | 10:1 | 0.8 | 1200 | 57 | 14.3 | – | 0.75″ x 0.42″ | |
| CSR452 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 0.66 | 0.66 | 0.03 | 15,000 | 500 | 5.48:1 | 10.95:1 | 0.8 | 1200 | 48 | 12 | – | 0.75″ x 0.42″ | |
| CSR450 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 0.66 | 0.66 | 0.03 | 15,000 | 400 | 6.12:1 | 12.25:1 | 0.8 | 1200 | 38 | 9.5 | – | 0.75″ x 0.42″ | |
| CSR445 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1 | 0.9 | 0.03 | 10,000 | 10,000 | 1:1 | – | 1 | 800 | 950 | – | – | 0.75″ x 0.42″ | |
| CSR440 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1 | 0.9 | 0.03 | 10,000 | 10,000 | 1:1 | 2:1 | 1 | 800 | 950 | 238 | – | 0.75″ x 0.42″ | |
| CSR435 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1 | 0.9 | 0.03 | 10,000 | 7500 | 1.16:1 | 2.31:1 | 1 | 800 | 713 | 178 | – | 0.75″ x 0.42″ | |
| CSR430 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1 | 0.9 | 0.03 | 10,000 | 5000 | 1.41:1 | 2.83:1 | 1 | 800 | 475 | 119 | – | 0.75″ x 0.42″ | |
| CSR425 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1 | 0.9 | 0.03 | 10,000 | 2000 | 2.24:1 | 4.47:1 | 1 | 800 | 190 | 47.5 | – | 0.75″ x 0.42″ | |
| CSR420 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1 | 0.9 | 0.03 | 10,000 | 1500 | 2.58:1 | 5.16:1 | 1 | 800 | 143 | 35.8 | – | 0.75″ x 0.42″ | |
| CSR415 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1 | 0.9 | 0.03 | 10,000 | 1200 | 2.89:1 | 5.77:1 | 1 | 800 | 114 | 28.5 | – | 0.75″ x 0.42″ | |
| CSR410 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1 | 0.9 | 0.03 | 10,000 | 1000 | 3.16:1 | 6.32:1 | 1 | 800 | 95 | 23.8 | – | 0.75″ x 0.42″ | |
| CSR405 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1 | 0.9 | 0.03 | 10,000 | 600 | 4.08:1 | 8.16:1 | 1 | 800 | 57 | 14.25 | – | 0.75″ x 0.42″ | |
| CSR400 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1 | 0.9 | 0.03 | 10,000 | 500 | 4.47:1 | 8.94:1 | 1 | 800 | 47.5 | 11.88 | – | 0.75″ x 0.42″ | |
| CSR395 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1 | 0.9 | 0.03 | 10,000 | 200 | 7.07:1 | 14.14:1 | 1 | 800 | 19 | 4.75 | – | 0.75″ x 0.42″ | |
| CSR390 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1 | 0.9 | 0.03 | 10,000 | 100 | 10:1 | 20:1 | 1 | 800 | 9.5 | 2.38 | – | 0.75″ x 0.42″ | |
| CSR385 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1 | 0.9 | 0.03 | 10,000 | 16 | 25:1 | 50:1 | 1 | 800 | 1.52 | 0.38 | – | 0.75″ x 0.42″ | |
| CSR380 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1 | 0.9 | 0.03 | 10,000 | 12.8 | 28:1 | 56:1 | 1 | 800 | 1.22 | 0.3 | – | 0.75″ x 0.42″ | |
| CSR375 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.1 | 0.9 | 0.03 | 9000 | 9000 | 1:1 | – | 1.1 | 720 | 855 | – | – | 0.75″ x 0.42″ | |
| CSR370 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.2 | 0.9 | 0.03 | 8000 | 1200 | 2.58:1 | – | 1.1 | 640 | 114 | – | – | 0.75″ x 0.42″ | |
| CSR365 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.2 | 0.9 | 0.03 | 8000 | 1000 | 2.83:1 | 5.66:1 | 1.1 | 640 | 95 | 23.8 | – | 0.75″ x 0.42″ | |
| CSR360 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.2 | 0.9 | 0.03 | 8000 | 12.8 | 25:1 | 50:1 | 1.1 | 640 | 1.22 | 0.3 | – | 0.75″ x 0.42″ | |
| CSR355 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.3 | 0.9 | 0.03 | 7500 | 7500 | 1:1 | – | 1.2 | 600 | 713 | – | – | 0.75″ x 0.42″ | |
| CSR350 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.3 | 0.9 | 0.03 | 7500 | 2500 | 1.73:1 | 3.46:1 | 1.2 | 600 | 238 | 59.5 | – | 0.75″ x 0.42″ | |
| CSR345 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.3 | 0.9 | 0.03 | 7500 | 600 | 3.54:1 | 7.07:1 | 1.2 | 600 | 57 | 14.3 | – | 0.75″ x 0.42″ | |
| CSR340 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.3 | 0.9 | 0.03 | 7500 | 100 | 8.66:1 | 17.32:1 | 1.2 | 600 | 9.5 | 2.38 | – | 0.75″ x 0.42″ | |
| CSR335 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.3 | 0.9 | 0.03 | 7500 | 50 | 12.25:1 | 24.5:1 | 1.2 | 600 | 4.75 | 1.19 | – | 0.75″ x 0.42″ | |
| CSR330 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 5000 | 5000 | 1:1 | 2:1 | 1.4 | 400 | 475 | 119 | – | 0.75″ x 0.42″ | |
| CSR325 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 5000 | 500 | 3.16:1 | 6.32:1 | 1.4 | 400 | 47.5 | 11.88 | – | 0.75″ x 0.42″ | |
| CSR320 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 4000 | 8000 | 1:1.41 | – | 1.6 | 320 | 760 | – | – | 0.75″ x 0.42″ | |
| CSR315 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 4000 | 1000 | 2:1 | 4:1 | 1.6 | 320 | 95 | 23.8 | – | 0.75″ x 0.42″ | |
| CSR314 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 4000 | 600 | 2.58:1 | 5.16:1 | 1.6 | 320 | 57 | 14.3 | – | 0.75″ x 0.42″ | |
| CSR312 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 4000 | 16 | 15.8:1 | 31.62:1 | 1.6 | 320 | 1.52 | 0.38 | – | 0.75″ x 0.42″ | |
| CSR310 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 3600 | 3600 | 1:1 | 2:1 | 1.7 | 288 | 342 | 86 | – | 0.75″ x 0.42″ | |
| CSR305 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 3000 | 3000 | 1:1 | – | 1.8 | 240 | 285 | – | – | 0.75″ x 0.42″ | |
| CSR300 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 3000 | 3000 | 1:1 | 2:1 | 1.8 | 240 | 285 | 71.3 | – | 0.75″ x 0.42″ | |
| CSR297 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 2500 | 2500 | 1:1 | 2:1 | 2 | 200 | 238 | 59.5 | – | 0.75″ x 0.42″ | |
| CSR295 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 2000 | 8000 | 1:2 | 1:1 | 2.2 | 160 | 760 | 190 | – | 0.75″ x 0.42″ | |
| CSR290 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 2000 | 2000 | 1:1 | – | 2.2 | 160 | 190 | – | – | 0.75″ x 0.42″ | |
| CSR285 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 2000 | 2000 | 1:1 | 2:1 | 2.2 | 160 | 190 | 47.5 | – | 0.75″ x 0.42″ | |
| CSR283 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 2000 | 8 | 15.8:1 | 31.6:1 | 2.2 | 160 | 0.76 | 0.19 | – | 0.75″ x 0.42″ | |
| CSR280 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 1600 | 12.8 | 11.18:1 | 22.36:1 | 2.5 | 128 | 1.22 | 3 | – | 0.75″ x 0.42″ | |
| CSR275 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 1500 | 1500 | 1:1 | – | 2.5 | 120 | 142 | – | – | 0.75″ x 0.42″ | |
| CSR270 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 1500 | 600 | 1.58:1 | – | 2.5 | 120 | 57 | – | – | 0.75″ x 0.42″ | |
| CSR265 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 1500 | 500 | 1.73:1 | 3.46:1 | 2.5 | 120 | 47.5 | 11.88 | – | 0.75″ x 0.42″ | |
| CSR260 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 1500 | 12 | 11.18:1 | 22.36:1 | 2.5 | 120 | 1.14 | 0.29 | – | 0.75″ x 0.42″ | |
| CSR255 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 1200 | 1200 | 1:1 | – | 3 | 96 | 114 | – | – | 0.75″ x 0.42″ | |
| CSR250 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 1200 | 1200 | 1:1 | 2:1 | 3 | 96 | 114 | 28.5 | – | 0.75″ x 0.42″ | |
| CSR245 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 1200 | 500 | 1.55:1 | 3.1:1 | 3 | 96 | 47.5 | 11.88 | – | 0.75″ x 0.42″ | |
| CSR240 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 1200 | 12.8 | 9.68:1 | 19.4:1 | 3 | 96 | 1.22 | 0.3 | – | 0.75″ x 0.42″ | |
| CSR235 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 1060 | 12.8 | 9.1:1 | 18.2:1 | 3 | 85 | 1.22 | 0.3 | – | 0.75″ x 0.42″ | |
| CSR230 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 1000 | 1000 | 1:1 | 2:1 | 3 | 80 | 95 | 23.8 | – | 0.75″ x 0.42″ | |
| CSR225 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 1000 | 50 | 4.47:1 | 8.94:1 | 3 | 80 | 4.75 | 1.19 | – | 0.75″ x 0.42″ | |
| CSR220 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 1000 | 12 | 9.13:1 | 18.26:1 | 3 | 80 | 1.14 | 0.29 | – | 0.75″ x 0.42″ | |
| CSR217 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 900 | 900 | 1:1 | – | 3 | 72 | 85.5 | – | – | 0.75″ x 0.42″ | |
| CSR215 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 900 | 600 | 1.23:1 | 2.45:1 | 3 | 72 | 57 | 14.3 | – | 0.75″ x 0.42″ | |
| CSR210 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 800 | 800 | 1:1 | 2:1 | 3.5 | 64 | 76 | 19 | – | 0.75″ x 0.42″ | |
| CSR205 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 800 | 48 | 4.08:1 | 8.16:1 | 3.5 | 64 | 4.56 | 1.14 | – | 0.75″ x 0.42″ | |
| CSR200 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 800 | 12.8 | 7.91:1 | 15.8:1 | 3.5 | 64 | 1.22 | 0.3 | – | 0.75″ x 0.42″ | |
| CSR195 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 700 | 100 | 2.65:1 | 5.29:1 | 3.5 | 56 | 9.5 | 2.38 | – | 0.75″ x 0.42″ | |
| CSR190 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 640 | 12.8 | 7.07:1 | 14.14:1 | 4 | 51.2 | 1.22 | 0.3 | – | 0.75″ x 0.42″ | |
| CSR187 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 600 | 1200 | 1:1.41 | 1.41:1 | 4 | 48 | 114 | 28.5 | – | 0.75″ x 0.42″ | |
| CSR186 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 600 | 900 | 1:1.22 | – | 4 | 48 | 85.5 | – | – | 0.75″ x 0.42″ | |
| CSR185 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 600 | 600 | 1:1 | – | 4 | 48 | 57 | – | – | 0.75″ x 0.42″ | |
| CSR180 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 600 | 600 | 1:1 | 2:1 | 4 | 48 | 57 | 14.25 | – | 0.75″ x 0.42″ | |
| CSR175 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 600 | 200 | 1.73:1 | 3.46:1 | 4 | 48 | 19 | 4.75 | – | 0.75″ x 0.42″ | |
| CSR170 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 600 | 48 | 3.54:1 | 7.07:1 | 4 | 48 | 4.56 | 1.14 | – | 0.75″ x 0.42″ | |
| CSR167 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 600 | 30 | 4.47:1 | 8.94:1 | 4 | 48 | 2.85 | 0.71 | – | 0.75″ x 0.42″ | |
| CSR165 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 600 | 12.8 | 6.85:1 | 13.7:1 | 4 | 48 | 1.22 | 0.3 | – | 0.75″ x 0.42″ | |
| CSR160 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 500 | 600 | 1:1.1 | 1.83:1 | 4.5 | 40 | 57 | 14.25 | – | 0.75″ x 0.42″ | |
| CSR155 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 500 | 500 | 1:1 | – | 4.5 | 40 | 47.5 | – | – | 0.75″ x 0.42″ | |
| CSR150 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 500 | 500 | 1:1 | 2:1 | 4.5 | 40 | 47.5 | 11.88 | – | 0.75″ x 0.42″ | |
| CSR147 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 500 | 150 | 1.83:1 | 3.65:1 | 4.5 | 40 | 14.25 | 3.56 | – | 0.75″ x 0.42″ | |
| CSR145 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 500 | 50 | 3.16:1 | 6.32:1 | 4.5 | 40 | 4.75 | 1.19 | – | 0.75″ x 0.42″ | |
| CSR144 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 500 | 16 | 5.6:1 | 11.2:1 | 4.5 | 40 | 1.52 | 0.38 | – | 0.75″ x 0.42″ | |
| CSR142 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 500 | 12.8 | 6.25:1 | 12.5:1 | 4.5 | 40 | 1.22 | 0.3 | – | 0.75″ x 0.42″ | |
| CSR140 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 400 | 4000 | 1:3.16 | 1:1.58 | 5 | 32 | 380 | 95 | – | 0.75″ x 0.42″ | |
| CSR135 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 400 | 2000 | 1:2.24 | 1:1.12 | 5 | 32 | 190 | 47.5 | – | 0.75″ x 0.42″ | |
| CSR130 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 400 | 1000 | 1:1.58 | 1.26:1 | 5 | 32 | 95 | 23.8 | – | 0.75″ x 0.42″ | |
| CSR125 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 400 | 400 | 1:1 | 2:1 | 5 | 32 | 38 | 9.5 | – | 0.75″ x 0.42″ | |
| CSR120 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 400 | 200 | 1.41:1 | 2.83:1 | 5 | 32 | 19 | 4.75 | – | 0.75″ x 0.42″ | |
| CSR115 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 400 | 120 | 1.83:1 | 3.65:1 | 5 | 32 | 11.4 | 2.85 | – | 0.75″ x 0.42″ | |
| CSR110 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 400 | 40 | 3.16:1 | 6.32:1 | 5 | 32 | 3.8 | 0.95 | – | 0.75″ x 0.42″ | |
| CSR105 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 320 | 12.8 | 5:1 | 10:1 | 5.5 | 25.6 | 1.22 | 0.3 | – | 0.75″ x 0.42″ | |
| CSR100 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 300 | 600 | 1:1.41 | 1.41:1 | 5.5 | 24 | 57 | 14.25 | – | 0.75″ x 0.42″ | |
| CSR095 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 300 | 300 | 1:1 | 2:1 | 5.5 | 24 | 28.5 | 7.13 | – | 0.75″ x 0.42″ | |
| CSR090 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 300 | 150 | 1.41:1 | 2.83:1 | 5.5 | 24 | 14.25 | 3.56 | – | 0.75″ x 0.42″ | |
| CSR085 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 300 | 50 | 2.45:1 | 4.9:1 | 5.5 | 24 | 4.75 | 1.19 | – | 0.75″ x 0.42″ | |
| CSR080 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 300 | 12 | 5:1 | 10:1 | 5.5 | 24 | 1.14 | 0.29 | – | 0.75″ x 0.42″ | |
| CSR075 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 200 | 200 | 1:1 | 2:1 | 7 | 16 | 19 | 4.75 | – | 0.75″ x 0.42″ | |
| CSR070 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 150 | 600 | 1:2 | 1:1 | 8 | 12 | 57 | 14.3 | – | 0.75″ x 0.42″ | |
| CSR065 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 150 | 150 | 1:1 | 2:1 | 8 | 12 | 14.3 | 3.56 | – | 0.75″ x 0.42″ | |
| CSR060 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 150 | 100 | 1.22:1 | 2.44:1 | 8 | 12 | 9.5 | 2.38 | – | 0.75″ x 0.42″ | |
| CSR055 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 150 | 50 | 1.73:1 | 3.46:1 | 8 | 12 | 4.75 | 1.19 | – | 0.75″ x 0.42″ | |
| CSR050 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 150 | 12 | 3.54:1 | 7.08:1 | 8 | 12 | 1.14 | 0.29 | – | 0.75″ x 0.42″ | |
| CSR045 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 120 | 120 | 1:1 | 2:1 | 9 | 9.6 | 11.4 | 2.85 | – | 0.75″ x 0.42″ | |
| CSR040 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 120 | 60 | 1.41:1 | 2.83:1 | 9 | 9.6 | 5.7 | 1.4 | – | 0.75″ x 0.42″ | |
| CSR035 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 120 | 12.8 | 3.06:1 | 6.12:1 | 9 | 9.6 | 1.22 | 0.3 | – | 0.75″ x 0.42″ | |
| CSR030 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 100 | 100 | 1:1 | 2:1 | 10 | 8 | 9.5 | 2.38 | – | 0.75″ x 0.42″ | |
| CSR028 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 100 | 40 | 1.58:1 | 3.16:1 | 10 | 8 | 3.8 | 0.95 | – | 0.75″ x 0.42″ | |
| CSR025 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 80 | 32 | 1.58:1 | 3.16:1 | 11 | 6.4 | 3 | 0.75 | – | 0.75″ x 0.42″ | |
| CSR020 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 50 | 50 | 1:1 | 2:1 | 14 | 4 | 4.75 | 1.19 | – | 0.75″ x 0.42″ | |
| CSR018 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 48 | 16 | 1.73:1 | 3.46:1 | 14.5 | 3.84 | 1.52 | 0.38 | – | 0.75″ x 0.42″ | |
| CSR015 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 40 | 40 | 1:1 | 2:1 | 16 | 3.2 | 3.8 | 0.95 | – | 0.75″ x 0.42″ | |
| CSR010 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 32 | 32 | 1:1 | 2:1 | 17.5 | 2.56 | 3 | 0.75 | – | 0.75″ x 0.42″ | |
| CSR005 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 20 | 20 | 1:1 | 2:1 | 22 | 1.6 | 1.9 | 0.48 | – | 0.75″ x 0.42″ | |
| CSR003 | Round SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 20 | 8 | 1.58:1 | 3.16:1 | 22 | 1.6 | 0.76 | 0.19 | – | 0.75″ x 0.42″ | |
| 82620 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 0.07 | 0.07 | 0.03 | 135,000 | 82 | 40.6:1 | 81.2:1 | 0.2 | 10800 | 7.8 | 1.9 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82615 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 0.1 | 0.1 | 0.03 | 100,000 | 10,000 | 3.16:1 | 6.32:1 | 0.3 | 8000 | 950 | 238 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82614 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 0.1 | 0.1 | 0.03 | 100,000 | 2000 | 7.07:1 | 14.14:1 | 0.3 | 8000 | 190 | 47.5 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82613 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 0.1 | 0.1 | 0.03 | 100,000 | 1000 | 10:1 | 20:1 | 0.3 | 8000 | 95 | 23.8 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82610 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 0.1 | 0.1 | 0.03 | 100,000 | 500 | 14.1:1 | 28.3:1 | 0.3 | 8000 | 47.5 | 11.88 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82605 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 0.1 | 0.1 | 0.03 | 100,000 | 100 | 31.6:1 | 63.2:1 | 0.3 | 8000 | 9.5 | 2.38 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82600 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 0.1 | 0.1 | 0.03 | 100,000 | 60 | 40.8:1 | 81.6:1 | 0.3 | 8000 | 5.7 | 1.43 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82595 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 0.1 | 0.1 | 0.03 | 95,000 | 15,000 | 2.5:1 | 5:1 | 0.3 | 7600 | 1430 | 358 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82590 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 0.11 | 0.11 | 0.03 | 90,000 | 10,000 | 3:1 | 6:1 | 0.3 | 7200 | 950 | 238 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82587 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 0.12 | 0.12 | 0.03 | 80,000 | 15,000 | 2.3:1 | 4.6:1 | 0.3 | 6400 | 1430 | 358 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82585 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 0.16 | 0.16 | 0.03 | 62,500 | 50 | 35.4:1 | 70.7:1 | 0.4 | 5000 | 4.75 | 1.19 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82580 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 0.16 | 0.16 | 0.03 | 60,000 | 15,000 | 2:1 | 4:1 | 0.4 | 4800 | 1430 | 358 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82579 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 0.2 | 0.2 | 0.03 | 50,000 | 50,000 | 1:1 | 2:1 | 0.4 | 4000 | 4750 | 1190 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82578 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 0.2 | 0.2 | 0.03 | 50,000 | 600 | 9.13:1 | 18.26:1 | 0.4 | 4000 | 57 | 14.3 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82577 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 0.2 | 0.2 | 0.03 | 50,000 | 500 | 10:1 | 20:1 | 0.4 | 4000 | 47.5 | 11.88 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82575 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 0.2 | 0.2 | 0.03 | 50,000 | 200 | 15.8:1 | 31.6:1 | 0.4 | 4000 | 19 | 4.75 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82570 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 0.25 | 0.25 | 0.03 | 40,000 | 40,000 | 1:1 | – | 0.5 | 3200 | 3800 | – | 0.80″ x 0.80″ x 0.46″ | – | |
| 82565 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 0.25 | 0.25 | 0.03 | 40,000 | 20,000 | 1.41:1 | 2.83:1 | 0.5 | 3200 | 1900 | 475 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82560 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 0.25 | 0.25 | 0.03 | 40,000 | 4000 | 3.16:1 | 6.32:1 | 0.5 | 3200 | 380 | 95 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82555 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 0.25 | 0.25 | 0.03 | 40,000 | 2000 | 4.47:1 | 8.94:1 | 0.5 | 3200 | 190 | 47.5 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82550 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 0.25 | 0.25 | 0.03 | 40,000 | 400 | 10:1 | 20:1 | 0.5 | 3200 | 38 | 9.5 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82545 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 0.33 | 0.33 | 0.03 | 30,000 | 30,000 | 1:1 | – | 0.6 | 2400 | 2850 | – | 0.80″ x 0.80″ x 0.46″ | – | |
| 82540 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 0.33 | 0.33 | 0.03 | 30,000 | 10,000 | 1.73:1 | 3.46:1 | 0.6 | 2400 | 950 | 238 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82535 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 0.33 | 0.33 | 0.03 | 30,000 | 5000 | 2.45:1 | 4.9:1 | 0.6 | 2400 | 475 | 119 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82534 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 0.33 | 0.33 | 0.03 | 30,000 | 200 | 12.2:1 | 24.5:1 | 0.6 | 2400 | 19 | 4.75 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82532 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 0.33 | 0.33 | 0.03 | 30,000 | 500 | 7.7:1 | 15.5:1 | 0.6 | 2400 | 47.5 | 11.88 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82530 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 0.33 | 0.33 | 0.03 | 30,000 | 1200 | 5:1 | 10:1 | 0.6 | 2400 | 114 | 28.5 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82525 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 0.33 | 0.33 | 0.03 | 30,000 | 50 | 24.5:1 | 49:1 | 0.6 | 2400 | 4.75 | 1.19 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82520 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 0.4 | 0.4 | 0.03 | 25,000 | 1000 | 5:1 | 10:1 | 0.6 | 2000 | 95 | 23.8 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82515 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 0.4 | 0.4 | 0.03 | 25,000 | 500 | 7.07:1 | 14.14:1 | 0.6 | 2000 | 47.5 | 11.88 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82510 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 0.5 | 0.5 | 0.03 | 20,000 | 20,000 | 1:1 | – | 0.7 | 1600 | 1900 | – | 0.80″ x 0.80″ x 0.46″ | – | |
| 82505 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 0.5 | 0.5 | 0.03 | 20,000 | 10,000 | 1.41:1 | 2.83:1 | 0.7 | 1600 | 950 | 238 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82500 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 0.5 | 0.5 | 0.03 | 20,000 | 5000 | 2:1 | 4:1 | 0.7 | 1600 | 475 | 119 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82495 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 0.5 | 0.5 | 0.03 | 20,000 | 1000 | 4.47:1 | 8.94:1 | 0.7 | 1600 | 95 | 23.8 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82490 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 0.5 | 0.5 | 0.03 | 20,000 | 800 | 5:1 | 10:1 | 0.7 | 1600 | 76 | 19 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82485 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 0.5 | 0.5 | 0.03 | 20,000 | 600 | 5.77:1 | 11.55:1 | 0.7 | 1600 | 57 | 14.25 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82480 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 0.5 | 0.5 | 0.03 | 20,000 | 500 | 6.32:1 | 12.65:1 | 0.7 | 1600 | 47.5 | 11.88 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82475 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 0.62 | 0.62 | 0.03 | 16,000 | 1000 | 4:1 | 8:1 | 0.8 | 1280 | 95 | 23.8 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82470 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 0.66 | 0.66 | 0.03 | 15,000 | 15,000 | 1:1 | 2:1 | 0.8 | 1200 | 1430 | 357 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82465 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 0.66 | 0.66 | 0.03 | 15,000 | 15,000 | 1:1 | – | 0.8 | 1200 | 1430 | – | 0.80″ x 0.80″ x 0.46″ | – | |
| 82460 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 0.66 | 0.66 | 0.03 | 15,000 | 10,000 | 1.22:1 | 2.45:1 | 0.8 | 1200 | 950 | 238 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82455 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 0.66 | 0.66 | 0.03 | 15,000 | 600 | 5:1 | 10:1 | 0.8 | 1200 | 57 | 14.3 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82452 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 0.66 | 0.66 | 0.03 | 15,000 | 500 | 5.48:1 | 10.95:1 | 0.8 | 1200 | 48 | 12 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82450 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 0.66 | 0.66 | 0.03 | 15,000 | 400 | 6.12:1 | 12.25:1 | 0.8 | 1200 | 38 | 9.5 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82445 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1 | 0.9 | 0.03 | 10,000 | 10,000 | 1:1 | – | 1 | 800 | 950 | – | 0.80″ x 0.80″ x 0.46″ | – | |
| 82440 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1 | 0.9 | 0.03 | 10,000 | 10,000 | 1:1 | 2:1 | 1 | 800 | 950 | 238 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82435 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1 | 0.9 | 0.03 | 10,000 | 7500 | 1.16:1 | 2.31:1 | 1 | 800 | 713 | 178 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82430 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1 | 0.9 | 0.03 | 10,000 | 5000 | 1.41:1 | 2.83:1 | 1 | 800 | 475 | 119 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82425 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1 | 0.9 | 0.03 | 10,000 | 2000 | 2.24:1 | 4.47:1 | 1 | 800 | 190 | 47.5 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82420 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1 | 0.9 | 0.03 | 10,000 | 1500 | 2.58:1 | 5.16:1 | 1 | 800 | 143 | 35.8 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82415 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1 | 0.9 | 0.03 | 10,000 | 1200 | 2.89:1 | 5.77:1 | 1 | 800 | 114 | 28.5 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82410 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1 | 0.9 | 0.03 | 10,000 | 1000 | 3.16:1 | 6.32:1 | 1 | 800 | 95 | 23.8 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82405 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1 | 0.9 | 0.03 | 10,000 | 600 | 4.08:1 | 8.16:1 | 1 | 800 | 57 | 14.25 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82400 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1 | 0.9 | 0.03 | 10,000 | 500 | 4.47:1 | 8.94:1 | 1 | 800 | 47.5 | 11.88 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82395 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1 | 0.9 | 0.03 | 10,000 | 200 | 7.07:1 | 14.14:1 | 1 | 800 | 19 | 4.75 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82390 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1 | 0.9 | 0.03 | 10,000 | 100 | 10:1 | 20:1 | 1 | 800 | 9.5 | 2.38 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82385 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1 | 0.9 | 0.03 | 10,000 | 16 | 25:1 | 50:1 | 1 | 800 | 1.52 | 0.38 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82380 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1 | 0.9 | 0.03 | 10,000 | 12.8 | 28:1 | 56:1 | 1 | 800 | 1.22 | 0.3 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82375 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.1 | 0.9 | 0.03 | 9000 | 9000 | 1:1 | – | 1.1 | 720 | 855 | – | 0.80″ x 0.80″ x 0.46″ | – | |
| 82370 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.2 | 0.9 | 0.03 | 8000 | 1200 | 2.58:1 | – | 1.1 | 640 | 114 | – | 0.80″ x 0.80″ x 0.46″ | – | |
| 82365 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.2 | 0.9 | 0.03 | 8000 | 1000 | 2.83:1 | 5.66:1 | 1.1 | 640 | 95 | 23.8 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82360 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.2 | 0.9 | 0.03 | 8000 | 12.8 | 25:1 | 50:1 | 1.1 | 640 | 1.22 | 0.3 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82355 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.3 | 0.9 | 0.03 | 7500 | 7500 | 1:1 | – | 1.2 | 600 | 713 | – | 0.80″ x 0.80″ x 0.46″ | – | |
| 82350 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.3 | 0.9 | 0.03 | 7500 | 2500 | 1.73:1 | 3.46:1 | 1.2 | 600 | 238 | 59.5 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82345 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.3 | 0.9 | 0.03 | 7500 | 600 | 3.54:1 | 7.07:1 | 1.2 | 600 | 57 | 14.3 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82340 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.3 | 0.9 | 0.03 | 7500 | 100 | 8.66:1 | 17.32:1 | 1.2 | 600 | 9.5 | 2.38 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82335 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.3 | 0.9 | 0.03 | 7500 | 50 | 12.25:1 | 24.5:1 | 1.2 | 600 | 4.75 | 1.19 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82330 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 5000 | 5000 | 1:1 | 2:1 | 1.4 | 400 | 475 | 119 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82325 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 5000 | 500 | 3.16:1 | 6.32:1 | 1.4 | 400 | 47.5 | 11.88 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82320 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 4000 | 8000 | 1:1.41 | – | 1.6 | 320 | 760 | – | 0.80″ x 0.80″ x 0.46″ | – | |
| 82315 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 4000 | 1000 | 2:1 | 4:1 | 1.6 | 320 | 95 | 23.8 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82314 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 4000 | 600 | 2.58:1 | 5.16:1 | 1.6 | 320 | 57 | 14.3 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82312 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 4000 | 16 | 15.8:1 | 31.62:1 | 1.6 | 320 | 1.52 | 0.38 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82310 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 3600 | 3600 | 1:1 | 2:1 | 1.7 | 288 | 342 | 86 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82305 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 3000 | 3000 | 1:1 | – | 1.8 | 240 | 285 | – | 0.80″ x 0.80″ x 0.46″ | – | |
| 82300 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 3000 | 3000 | 1:1 | 2:1 | 1.8 | 240 | 285 | 71.3 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82297 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 2500 | 2500 | 1:1 | 2:1 | 2 | 200 | 238 | 59.5 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82295 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 2000 | 8000 | 1:2 | 1:1 | 2.2 | 160 | 760 | 190 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82290 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 2000 | 2000 | 1:1 | – | 2.2 | 160 | 190 | – | 0.80″ x 0.80″ x 0.46″ | – | |
| 82285 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 2000 | 2000 | 1:1 | 2:1 | 2.2 | 160 | 190 | 47.5 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82283 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 2000 | 8 | 15.8:1 | 31.6:1 | 2.2 | 160 | 0.76 | 0.19 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82280 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 1600 | 12.8 | 11.18:1 | 22.36:1 | 2.5 | 128 | 1.22 | 3 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82275 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 1500 | 1500 | 1:1 | – | 2.5 | 120 | 142 | – | 0.80″ x 0.80″ x 0.46″ | – | |
| 82270 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 1500 | 600 | 1.58:1 | – | 2.5 | 120 | 57 | – | 0.80″ x 0.80″ x 0.46″ | – | |
| 82265 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 1500 | 500 | 1.73:1 | 3.46:1 | 2.5 | 120 | 47.5 | 11.88 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82260 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 1500 | 12 | 11.18:1 | 22.36:1 | 2.5 | 120 | 1.14 | 0.29 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82255 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 1200 | 1200 | 1:1 | – | 3 | 96 | 114 | – | 0.80″ x 0.80″ x 0.46″ | – | |
| 82250 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 1200 | 1200 | 1:1 | 2:1 | 3 | 96 | 114 | 28.5 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82245 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 1200 | 500 | 1.55:1 | 3.1:1 | 3 | 96 | 47.5 | 11.88 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82240 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 1200 | 12.8 | 9.68:1 | 19.4:1 | 3 | 96 | 1.22 | 0.3 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82235 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 1060 | 12.8 | 9.1:1 | 18.2:1 | 3 | 85 | 1.22 | 0.3 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82230 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 1000 | 1000 | 1:1 | 2:1 | 3 | 80 | 95 | 23.8 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82225 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 1000 | 50 | 4.47:1 | 8.94:1 | 3 | 80 | 4.75 | 1.19 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82220 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 1000 | 12 | 9.13:1 | 18.26:1 | 3 | 80 | 1.14 | 0.29 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82217 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 900 | 900 | 1:1 | – | 3 | 72 | 85.5 | – | 0.80″ x 0.80″ x 0.46″ | – | |
| 82215 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 900 | 600 | 1.23:1 | 2.45:1 | 3 | 72 | 57 | 14.3 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82210 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 800 | 800 | 1:1 | 2:1 | 3.5 | 64 | 76 | 19 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82205 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 800 | 48 | 4.08:1 | 8.16:1 | 3.5 | 64 | 4.56 | 1.14 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82200 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 800 | 12.8 | 7.91:1 | 15.8:1 | 3.5 | 64 | 1.22 | 0.3 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82195 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 700 | 100 | 2.65:1 | 5.29:1 | 3.5 | 56 | 9.5 | 2.38 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82190 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 640 | 12.8 | 7.07:1 | 14.14:1 | 4 | 51.2 | 1.22 | 0.3 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82187 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 600 | 1200 | 1:1.41 | 1.41:1 | 4 | 48 | 114 | 28.5 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82186 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 600 | 900 | 1:1.22 | – | 4 | 48 | 85.5 | – | 0.80″ x 0.80″ x 0.46″ | – | |
| 82185 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 600 | 600 | 1:1 | – | 4 | 48 | 57 | – | 0.80″ x 0.80″ x 0.46″ | – | |
| 82180 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 600 | 600 | 1:1 | 2:1 | 4 | 48 | 57 | 14.25 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82175 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 600 | 200 | 1.73:1 | 3.46:1 | 4 | 48 | 19 | 4.75 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82170 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 600 | 48 | 3.54:1 | 7.07:1 | 4 | 48 | 4.56 | 1.14 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82167 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 600 | 30 | 4.47:1 | 8.94:1 | 4 | 48 | 2.85 | 0.71 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82165 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 600 | 12.8 | 6.85:1 | 13.7:1 | 4 | 48 | 1.22 | 0.3 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82160 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 500 | 600 | 1:1.1 | 1.83:1 | 4.5 | 40 | 57 | 14.25 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82155 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 500 | 500 | 1:1 | – | 4.5 | 40 | 47.5 | – | 0.80″ x 0.80″ x 0.46″ | – | |
| 82150 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 500 | 500 | 1:1 | 2:1 | 4.5 | 40 | 47.5 | 11.88 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82147 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 500 | 150 | 1.83:1 | 3.65:1 | 4.5 | 40 | 14.25 | 3.56 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82145 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 500 | 50 | 3.16:1 | 6.32:1 | 4.5 | 40 | 4.75 | 1.19 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82144 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 500 | 16 | 5.6:1 | 11.2:1 | 4.5 | 40 | 1.52 | 0.38 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82142 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 500 | 12.8 | 6.25:1 | 12.5:1 | 4.5 | 40 | 1.22 | 0.3 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82140 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 400 | 4000 | 1:3.16 | 1:1.58 | 5 | 32 | 380 | 95 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82135 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 400 | 2000 | 1:2.24 | 1:1.12 | 5 | 32 | 190 | 47.5 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82130 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 400 | 1000 | 1:1.58 | 1.26:1 | 5 | 32 | 95 | 23.8 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82125 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 400 | 400 | 1:1 | 2:1 | 5 | 32 | 38 | 9.5 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82120 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 400 | 200 | 1.41:1 | 2.83:1 | 5 | 32 | 19 | 4.75 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82115 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 400 | 120 | 1.83:1 | 3.65:1 | 5 | 32 | 11.4 | 2.85 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82110 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 400 | 40 | 3.16:1 | 6.32:1 | 5 | 32 | 3.8 | 0.95 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82105 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 320 | 12.8 | 5:1 | 10:1 | 5.5 | 25.6 | 1.22 | 0.3 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82100 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 300 | 600 | 1:1.41 | 1.41:1 | 5.5 | 24 | 57 | 14.25 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82095 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 300 | 300 | 1:1 | 2:1 | 5.5 | 24 | 28.5 | 7.13 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82090 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 300 | 150 | 1.41:1 | 2.83:1 | 5.5 | 24 | 14.25 | 3.56 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82085 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 300 | 50 | 2.45:1 | 4.9:1 | 5.5 | 24 | 4.75 | 1.19 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82080 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 300 | 12 | 5:1 | 10:1 | 5.5 | 24 | 1.14 | 0.29 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82075 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 200 | 200 | 1:1 | 2:1 | 7 | 16 | 19 | 4.75 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82070 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 150 | 600 | 1:2 | 1:1 | 8 | 12 | 57 | 14.3 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82065 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 150 | 150 | 1:1 | 2:1 | 8 | 12 | 14.3 | 3.56 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82060 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 150 | 100 | 1.22:1 | 2.44:1 | 8 | 12 | 9.5 | 2.38 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82055 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 150 | 50 | 1.73:1 | 3.46:1 | 8 | 12 | 4.75 | 1.19 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82050 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 150 | 12 | 3.54:1 | 7.08:1 | 8 | 12 | 1.14 | 0.29 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82045 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 120 | 120 | 1:1 | 2:1 | 9 | 9.6 | 11.4 | 2.85 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82040 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 120 | 60 | 1.41:1 | 2.83:1 | 9 | 9.6 | 5.7 | 1.4 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82035 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 120 | 12.8 | 3.06:1 | 6.12:1 | 9 | 9.6 | 1.22 | 0.3 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82030 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 100 | 100 | 1:1 | 2:1 | 10 | 8 | 9.5 | 2.38 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82028 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 100 | 40 | 1.58:1 | 3.16:1 | 10 | 8 | 3.8 | 0.95 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82025 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 80 | 32 | 1.58:1 | 3.16:1 | 11 | 6.4 | 3 | 0.75 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82020 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 50 | 50 | 1:1 | 2:1 | 14 | 4 | 4.75 | 1.19 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82018 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 48 | 16 | 1.73:1 | 3.46:1 | 14.5 | 3.84 | 1.52 | 0.38 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82015 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 40 | 40 | 1:1 | 2:1 | 16 | 3.2 | 3.8 | 0.95 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82010 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 32 | 32 | 1:1 | 2:1 | 17.5 | 2.56 | 3 | 0.75 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82005 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 20 | 20 | 1:1 | 2:1 | 22 | 1.6 | 1.9 | 0.48 | 0.80″ x 0.80″ x 0.46″ | – | |
| 82003 | Square SMT – Gull Lead | 75 Hz to 30 KHz | 1.5 | 0.9 | 0.03 | 20 | 8 | 1.58:1 | 3.16:1 | 22 | 1.6 | 0.76 | 0.19 | 0.80″ x 0.80″ x 0.46″ | – |
